1、 Regarding the die-cutting use of PET release film, the following common problems are often encountered: 1. After the adhesive tape is attached to the release film, some of the adhesive tape peels back and makes a popping sound. 2. Anti stripping, the material that should be stripped should not be stripped. 3. The adhesive tape and PET release film cannot be peeled off after being cut and placed for a period of time. 4. The surface of the release film is very oily, and it feels like the release layer is easily detached. 5. During the unwinding process, the release film generates static electricity and adsorbs dust. 2、 In response to the above issues, the following corresponding solutions have been proposed: 1. Making a sound during peeling is caused by excessive release force and 2. The result is uneven coating. 2. Anti stripping

PET release film is a commonly used material for heat transfer printing. The substrate is PET, coated with silicone oil, also known as silicone oil film. The traditional thickness ranges from 0.025mm to 0.25mm. Colors: transparent, semi transparent, matte white, pure white, milky white, semi transparent, glossy black, matte black. It can be divided into cold and hot tearing and matte surface. After anti-static and scratch resistant treatment, the product has good adsorption and adhesion. PET release film has been widely used in packaging, printing, screen printing, pad printing, nameplate, film switch, flexible circuit, insulation products, circuit board, laser anti-counterfeiting, bonding, electronics, sealing material film, reflective material, waterproof material

The uniform transmission of the working pressure and temperature of the hot pressed board can make the adhesion between the paper veneer and the substrate more tight, uniform, and flat, thereby improving the surface and internal quality of the decorative board. The buffer pad has excellent performance such as buffering and heat resistance, compensating for printing plate errors, and protecting the template. When laying, the cushion surface must be installed from top to bottom between the heat transfer plate of the hot press and the stainless steel template. The cushion must be flat. The seeds are not fixed to prevent debris from entering the sidewalk. Then heat up to 60-80 degrees Celsius and increase the pressure to slightly close the pressure plate. During the fixation process, only four corners in the length direction are fixed, not fixed

When using silicone cushioning pads, they are usually laid flat, and this is also the case with hot pressing machines. Placing them in a reasonable position can effectively protect the hot pressing machine in working condition. No matter what the material is, the use of cushioning pads is to provide protection, help mechanical equipment reduce the chance of damage while working, and thus achieve the goal of extending its service life. The reason why silicone cushioning is recommended is because of its special material and superior performance. Silicone cushion is a professional anti-collision rubber pad, mainly used for the edges of some pallets. Like anti-collision rubber, it also

Silicone cushioning pads are not only pressure resistant, high-temperature resistant, and wear-resistant, but also non-toxic and odorless, and harmless to the human body. What are the specific applications of seat cushions in daily life and work? There are three applications of silicone cushion: firstly, the advancement of industry and technology in the automotive industry has led to the mechanization of automotive production. In a car factory, there are many machines distributed between several production lines. These machines are inevitably subject to friction and wear during use, so buffer pads are often used when connecting machines to prevent slipping and shock, which can protect the machine to the maximum extent and reduce losses. 2、 Applied to logistics loading and unloading platforms during the logistics loading and unloading process

TPX release film has advantages such as heat resistance, drug resistance, oil resistance, electrical properties, safety, optical properties, etc., and has a wide range of applications. The main applications include: medical, cosmetics containers, physical and chemical experimental apparatus, microwave food containers, electrical/electronic parts, industrial parts, films, information equipment parts, resin modifiers, electrical insulation materials, etc. In addition, advanced optical memory, Optical communication equipment, water treatment devices, air separation membranes and other applications are also under development. 1. High pressure steam is commonly used in medical equipment γ Radiation, ethylene oxide, etc. are used for sterilization. Compared with PVC, TPX release film will not adsorb ethylene oxide, so there is no

In addition to the excellent physical and mechanical properties of ordinary polyester films, release films also have excellent optical properties such as good transparency, low haze, and high glossiness. Mainly used for high-end vacuum aluminum plated products, with a mirror like appearance after aluminum plating, and good packaging and decoration effect; It can also be used as a laser anti-counterfeiting base film. The release film market has a large capacity, high added value, and significant economic benefits. What are the advantages of release membranes? 1. The release film is transparent and reflects the image of the product. Tight packaging with good anti scattering properties. Rain proof, moisture proof, and mold proof. Non restorative, with certain anti-counterfeiting functions. Release film is often used in convenience food, beverage markets, electronic appliances, metal products, especially shrink labels

What is the tensile strength of fiber cloth? It is also a widely accepted theoretical value in China, around 20 megapascals. However, measuring this value at the current level of craftsmanship and handicraft production is impractical. However, there is one method for measuring the tensile force of fiberglass cloth, which is more direct, such as physical formulas, stability performance curves, and smaller experimental units. The entire physical experiment requires great patience. The same principle applies to the tensile parameters of glass fiber and a steel bar. Measuring with metal wire will result in power loss, while measuring with glass fiber is equivalent to the tensile force of 1kg of steel bar.

There are many things that we use in our daily lives, and we need to use them correctly in order to better utilize them. How can we use it to achieve its effectiveness? There are actually many details that we need to pay attention to when using. So, when we use fiberglass cloth, we need to install and use it correctly so that it won't cause us some trouble in our future use. Our daily construction methods are actually very simple, as long as we follow the correct methods. So when we started construction, we also inspected the rust removal of the discipline foundation,

There is not much difference between glass fiber cloth and the main material of glass, mainly due to the different material performance requirements during the production process, so the formula is also different. The silicon dioxide content of flat glass is about 70-75%, and the silicon dioxide content of glass fiber is generally less than 60%. Glass is an inorganic material that melts at high temperatures (above 800 degrees Celsius, daily glass typically melts at 1100 degrees Celsius), and does not undergo chemical changes below the softening point temperature. Above the softening point temperature, it only softens, melts or decomposes, without any combustion phenomenon. Glass fiber cloth pulls glass into very thin glass fibers, which have good softness. Place the glass

We use many things in our daily lives, and we need to use them correctly to better utilize their effectiveness. How can we use it to achieve its effectiveness? In fact, there are many details that we need to pay attention to when using. Therefore, when we use fiberglass cloth, we should install and use it correctly to avoid causing some trouble for our future use. Our daily construction methods are actually very simple, as long as we follow the correct methods. So when we start construction, we check the discipline foundation for rust removal, and after passing the inspection, there are no problems. We apply asphalt paint again, and then wrap glass fiber cloth. After production, we ensure that

Fluorine plastic release film is used to isolate adhesive materials and is widely used in industries such as electronics, spray consumables, reflective materials, tape, self-adhesive waterproof rolls, etc. This article explains the characteristics and properties of fluoroplastic release films for you. The properties of fluorine plastic release film: 1. No migration phenomenon, eliminating the risk of silicone resin release film transferring to nearby materials. 2. Controllable release force, high glossiness, high cleanliness, residual adhesion of 94%, and good surface performance. 3. Excellent UV aging resistance, chemical corrosion resistance, and solvent penetration resistance. 4. The colors are generally transparent and milky white. Fluorine plastic release film is mainly used as a carrier for vacuum aluminum plating, that is, PET film is placed into the real